Vype eTank Pro

The dual coils have a combined resistance of 1.5 ohms. Coil resistance is already pre-set according to the wattage, in order to give you the best vaping experience and cannot be adjusted.

The Vype eTank Pro device contains a lithium-ion battery with a 1000 mAh capacity. A milliampere hour (mAh) is 1000th of an ampere hour (Ah). This is commonly used to describe the battery capacity.

The efficiency of the atomiser will deteriorate over time, depending on your personal vaping behaviour. We recommend you change your atomiser about every 2-4 weeks. We’d also suggest you replace it if you notice any deterioration in the taste or quality of the vapour from your Vype eTank Pro. If the atomiser head ever floods, clean your clearomiser and replace the atomiser head.

To fill your eTank Pro: • Ensure the eTank Pro is switched off • Unscrew the top of the clearomiser • Fill the tank by pouring eLiquid down the side of the tank, to level with the top of the clearomiser window • Important: do not pour any eLiquid into the centre of the atomiser • Once the eLiquid is in the clearomiser, screw the top of the clearomiser back onto the clearomiser and ensure that it is securely attached. Do not overtighten. • Ensure the eLiquid bottle lid is properly closed after use to avoid leakage or spillage. • You can also find these instructions in the user manual, or at www.govype.com. • WHY DO I NEED TO WAIT BETWEEN FILLING THE CLEAROMISER FOR THE FIRST TIME AND VAPING? It takes 5 minutes for the wick (within the atomiser) to be properly saturated by the eLiquid.